Basic Image 2.1.8.1 (PiXtend_Image_Basic_V2_1_8_1.zip) - 08.12.2023 The basic image is based on the well-known Raspbian Linux of the Raspberry Pi Foundation and contains the "pxdev" package (the PiXtend Linux Tools and C-Library), the PiXtend Python Library V2 (Python 2.7.x and Python 3.x compatible) and Node-RED. If you want to operate the PiXtend V2 -S- with your own program, use this SD card image. Image Version: 2.1.8.1 - Based on Raspbian Bullseye, Kernel 6.1.21 - Start setting: Console - SSH Server: Active - Bluetooth disabled, ttyAMA0 is now used instead of ttyS0 - Serial Interface: Active, Console login possible - Locale setting: System language: German, Keyboard setting: German - Runs on the Raspberry Pi models (B+, 2 B, 3 B, 3 B+, 4 B) - Filesystem automatically expands on first boot - Note regarding FHEM: Since Kernel version 5.5 some changes to perl5 where introduced which limit the possibility to communicate directly via the SPI bus from a perl program. The pi users folder contains a zip file which contains an alternate version of the PiXtend FHEM module, look for the part HiPi in the file name. After the installation of FHEM, take the HiPi modified version, rename it to „97_PiXtendV2.pm“ and replace the existing one in the FHEM folder, but remember to install the HiPi library before doing so. More information can be found in the FHEM forum (German) https://forum.fhem.de/index.php/topic,116308.0.html Alternatively use the previous version which contains a 4.x Kernel version, where the FHEM PiXtend V2 module works right away, use Image version 2.1.6.1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CODESYS Image 2.1.8.1 for PiXtend V2 -S- (PiXtend_Image_CODESYS_V2_1_8_1.zip) - 08.12.2023 In addition to the Raspbian operating system, the CODESYS image also contains the CODESYS Runtime extension (demo version) for the Raspberry Pi. Use this image if you want to use the PiXtend V2 -S- as a CODESYS control. Image Version: 2.1.8.1 - Based on Raspbian Bullseye, Kernel 6.1.21 - Contains CODESYS Runtime 4.1.0.0 (demo version) for CODESYS V3.5 SP17 - Start setting: PIXEL-desktop, Autologin - SSH Server: Active - Bluetooth disabled, ttyAMA0 is now used instead of ttyS0 - Serial Interface: Active, CODESYS exclusive - Locale setting: System language: German, Keyboard setting: German - Runs on the Raspberry Pi models (B+, 2 B, 3 B, 3 B+, 4 B) - Filesystem automatically expands on first boot Note: CODESYS V3.5 SP17 has some changes compared to previous versions, notably: - The installation of new packages via the Package Manager now mostly starts when the Package Manager and CODESYS are closed. - The Raspberry Pi runtime has a new version number; it is now 4.x.x.x and no longer 3.5.x.x. - The Raspberry Pi package now has a dependency to another (new) package named “CODESYS Edge Gateway for Linux” which has to be installed first. - The CODESYS Package Manager can now install multiple packages at once. To install all required packages, you only need to select the „PiXtend V2 Professional for CODESYS“ package and the other packages will be installed automatically, given that all packages are in the same folder. - User Management: New in this version is the activation of the User Management system by default. Up on the first connection to the PLC, CODESYS asks the user to set a “username” and a “password”. It’s probably a good idea to write this information down, as it is needed for each CODESYS session to be able to login into the PLC. If you don’t want to use this feature, please see the information in the CODESYS forum. https://forge.codesys.com/forge/talk/Runtime/thread/63f6319d2a/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CODESYS Image 2.1.3.1 L for PiXtend V2 -L- (PiXtend_Image_CODESYS_V2_1_3_1_L.zip) - 08.12.2023 In addition to the Raspbian operating system, the CODESYS image also contains the CODESYS Runtime extension (demo version) for the Raspberry Pi. Use this image if you want to use the PiXtend V2 -L- as a CODESYS control. Image Version: 2.1.3.1 L - Based on Raspbian Bullseye, Kernel 6.1.21 - Contains CODESYS Runtime 4.1.0.0 (demo version) for CODESYS V3.5 SP17 - Start setting: PIXEL-desktop, Autologin - SSH Server: Active - Bluetooth disabled, ttyAMA0 is now used instead of ttyS0 - Serial Interface: Active, CODESYS exclusive - Locale setting: System language: German, Keyboard setting: German - Runs on the Raspberry Pi models (B+, 2 B, 3 B, 3 B+, 4 B) - Filesystem automatically expands on first boot Note: CODESYS V3.5 SP17 has some changes compared to previous versions, notably: - The installation of new packages via the Package Manager now mostly starts when the Package Manager and CODESYS are closed. - The Raspberry Pi runtime has a new version number; it is now 4.x.x.x and no longer 3.5.x.x. - The Raspberry Pi package now has a dependency to another (new) package named “CODESYS Edge Gateway for Linux” which has to be installed first. - The CODESYS Package Manager can now install multiple packages at once. To install all required packages, you only need to select the „PiXtend V2 Professional for CODESYS“ package and the other packages will be installed automatically, given that all packages are in the same folder. - User Management: New in this version is the activation of the User Management system by default. Up on the first connection to the PLC, CODESYS asks the user to set a “username” and a “password”. It’s probably a good idea to write this information down, as it is needed for each CODESYS session to be able to login into the PLC. If you don’t want to use this feature, please see the information in the CODESYS forum. https://forge.codesys.com/forge/talk/Runtime/thread/63f6319d2a/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Basic Image 2.1.8.0 (PiXtend_Image_Basic_V2_1_8_0.zip) The basic image is based on the well-known Raspbian Linux of the Raspberry Pi Foundation and contains the "pxdev" package (the PiXtend Linux Tools and C-Library), the PiXtend Python Library V2 (Python 2.7.x and Python 3.x compatible) and Node_RED. If you want to operate the PiXtend V2 -S- with your own program, use this SD card image.Image Version: 2.1.8.0 - Based on Raspbian Bullseye, Kernel 5.15.32 - Start setting: Console - SSH Server: Active - Bluetooth disabled, ttyAMA0 is now used instead of ttyS0 - Serial Interface: Active, Console login possible - Locale setting: System language: German, Keyboard setting: German - Runs on the Raspberry Pi models (B+, 2 B, 3 B, 3 B+, 4 B) - Filesystem automatically expands on first boot - Note regarding FHEM: Since Kernel version 5.5 some changes to perl5 where introduced which limit the possibility to communicate directly via the SPI bus from a perl program. The pi users folder contains a zip file which contains an alternate version of the PiXtend FHEM module, look for the part HiPi in the file name. After the installation of FHEM, take the HiPi modified version, rename it to „97_PiXtendV2.pm“ and replace the existing one in the FHEM folder, but remember to install the HiPi library before doing so. More information can be found in the FHEM forum (German) https://forum.fhem.de/index.php/topic,116308.0.html Alternatively use the previous version which contains a 4.x Kernel version, where the FHEM PiXtend V2 module works right away, use Image version 2.1.6.1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CODESYS Image 2.1.8.0 for PiXtend V2 -S- (PiXtend_Image_CODESYS_V2_1_8_0.zip) In addition to the Raspbian operating system, the CODESYS image also contains the CODESYS Runtime extension (demo version) for the Raspberry Pi. Use this image if you want to use the PiXtend V2 -S- as a CODESYS control. Image Version: 2.1.8.0 - Based on Raspbian Bullseye, Kernel 5.15.32 - Contains CODESYS Runtime 4.1.0.0 (demo version) for CODESYS V3.5 SP17 - Start setting: PIXEL-desktop, Autologin - SSH Server: Active - Bluetooth disabled, ttyAMA0 is now used instead of ttyS0 - Serial Interface: Active, CODESYS exclusive - Locale setting: System language: German, Keyboard setting: German - Runs on the Raspberry Pi models (B+, 2 B, 3 B, 3 B+, 4 B) - Filesystem automatically expands on first boot Note: CODESYS V3.5 SP17 has some changes compared to previous versions, notably: - The installation of new packages via the Package Manager now mostly starts when the Package Manager and CODESYS are closed. - The Raspberry Pi runtime has a new version number; it is now 4.x.x.x and no longer 3.5.x.x. - The Raspberry Pi package now has a dependency to another (new) package named “CODESYS Edge Gateway for Linux” which has to be installed first. - The CODESYS Package Manager can now install multiple packages at once. To install all required packages, you only need to select the „PiXtend V2 Professional for CODESYS“ package and the other packages will be installed automatically, given that all packages are in the same folder. - User Management: New in this version is the activation of the User Management system by default. Up on the first connection to the PLC, CODESYS asks the user to set a “username” and a “password”. It’s probably a good idea to write this information down, as it is needed for each CODESYS session to be able to login into the PLC. If you don’t want to use this feature, please see the information in the CODESYS forum. https://forge.codesys.com/forge/talk/Runtime/thread/63f6319d2a/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CODESYS Image 2.1.3.0 L for PiXtend V2 -L- (PiXtend_Image_CODESYS_V2_1_3_0_L.zip) In addition to the Raspbian operating system, the CODESYS image also contains the CODESYS Runtime extension (demo version) for the Raspberry Pi. Use this image if you want to use the PiXtend V2 -L- as a CODESYS control. Image Version: 2.1.3.0 L - Based on Raspbian Bullseye, Kernel 5.15.32 - Contains CODESYS Runtime 4.1.0.0 (demo version) for CODESYS V3.5 SP17 - Start setting: PIXEL-desktop, Autologin - SSH Server: Active - Bluetooth disabled, ttyAMA0 is now used instead of ttyS0 - Serial Interface: Active, CODESYS exclusive - Locale setting: System language: German, Keyboard setting: German - Runs on the Raspberry Pi models (B+, 2 B, 3 B, 3 B+, 4 B) - Filesystem automatically expands on first boot Note: CODESYS V3.5 SP17 has some changes compared to previous versions, notably: - The installation of new packages via the Package Manager now mostly starts when the Package Manager and CODESYS are closed. - The Raspberry Pi runtime has a new version number; it is now 4.x.x.x and no longer 3.5.x.x. - The Raspberry Pi package now has a dependency to another (new) package named “CODESYS Edge Gateway for Linux” which has to be installed first. - The CODESYS Package Manager can now install multiple packages at once. To install all required packages, you only need to select the „PiXtend V2 Professional for CODESYS“ package and the other packages will be installed automatically, given that all packages are in the same folder. - User Management: New in this version is the activation of the User Management system by default. Up on the first connection to the PLC, CODESYS asks the user to set a “username” and a “password”. It’s probably a good idea to write this information down, as it is needed for each CODESYS session to be able to login into the PLC. If you don’t want to use this feature, please see the information in the CODESYS forum. https://forge.codesys.com/forge/talk/Runtime/thread/63f6319d2a/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Basic Image 2.1.7.1 (PiXtend_Image_Basic_V2_1_7_1.zip) The basic image is based on the well-known Raspbian Linux of the Raspberry Pi Foundation and contains the "pxdev" package (the PiXtend Linux Tools and C-Library), the PiXtend Python Library V2 (Python 2.7.x and Python 3.x compatible) and Node_RED. If you want to operate the PiXtend V2 -S- with your own program, use this SD card image.Image Version: 2.1.7.1 - Based on Raspbian Buster, Kernel 5.10.103 - Start setting: Console - SSH Server: Active - Bluetooth disabled, ttyAMA0 is now used instead of ttyS0 - Serial Interface: Active, Console login possible - Locale setting: System language: German, Keyboard setting: German - Runs on the Raspberry Pi models (B+, 2 B, 3 B, 3 B+, 4 B) - Filesystem automatically expands on first boot - Note regarding FHEM: Since Kernel version 5.5 some changes to perl5 where introduced which limit the possibility to communicate directly via the SPI bus from a perl program. The pi users folder contains a zip file which contains an alternate version of the PiXtend FHEM module, look for the part HiPi in the file name. After the installation of FHEM, take the HiPi modified version, rename it to „97_PiXtendV2.pm“ and replace the existing one in the FHEM folder, but remember to install the HiPi library before doing so. More information can be found in the FHEM forum (German) https://forum.fhem.de/index.php/topic,116308.0.html Alternatively use the previous version which contains a 4.x Kernel version, where the FHEM PiXtend V2 module works right away, use Image version 2.1.6.1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CODESYS Image 2.1.7.1 for PiXtend V2 -S- (PiXtend_Image_CODESYS_V2_1_7_1.zip) In addition to the Raspbian operating system, the CODESYS image also contains the CODESYS Runtime extension (demo version) for the Raspberry Pi. Use this image if you want to use the PiXtend V2 -S- as a CODESYS control.Image Version: 2.1.7.1 - Based on Raspbian Buster, Kernel 5.10.103 - Contains CODESYS Runtime 4.1.0.0 (demo version) for CODESYS V3.5 SP17 - Start setting: PIXEL-desktop, Autologin - SSH Server: Active - Bluetooth disabled, ttyAMA0 is now used instead of ttyS0 - Serial Interface: Active, CODESYS exclusive - Locale setting: System language: German, Keyboard setting: German - Runs on the Raspberry Pi models (B+, 2 B, 3 B, 3 B+, 4 B) - Filesystem automatically expands on first boot Note: CODESYS V3.5 SP17 has some changes compared to previous versions, notably: - The installation of new packages via the Package Manager now mostly starts when the Package Manager and CODESYS are closed. - The Raspberry Pi runtime has a new version number; it is now 4.x.x.x and no longer 3.5.x.x. - The Raspberry Pi package now has a dependency to another (new) package named “CODESYS Edge Gateway for Linux” which has to be installed first. - The CODESYS Package Manager can now install multiple packages at once. To install all required packages, you only need to select the „PiXtend V2 Professional for CODESYS“ package and the other packages will be installed automatically, given that all packages are in the same folder. - User Management: New in this version is the activation of the User Management system by default. Up on the first connection to the PLC, CODESYS asks the user to set a “username” and a “password”. It’s probably a good idea to write this information down, as it is needed for each CODESYS session to be able to login into the PLC. If you don’t want to use this feature, please see the information in the CODESYS forum. https://forge.codesys.com/forge/talk/Runtime/thread/63f6319d2a/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CODESYS Image 2.1.2.1 L for PiXtend V2 -L- (PiXtend_Image_CODESYS_V2_1_2_1_L.zip) In addition to the Raspbian operating system, the CODESYS image also contains the CODESYS Runtime extension (demo version) for the Raspberry Pi. Use this image if you want to use the PiXtend V2 -L- as a CODESYS control.Image Version: 2.1.2.1 L - Based on Raspbian Buster, Kernel 5.10.103 - Contains CODESYS Runtime 4.1.0.0 (demo version) for CODESYS V3.5 SP17 - Start setting: PIXEL-desktop, Autologin - SSH Server: Active - Bluetooth disabled, ttyAMA0 is now used instead of ttyS0 - Serial Interface: Active, CODESYS exclusive - Locale setting: System language: German, Keyboard setting: German - Prepared scripts for the CAN bus - Runs on the Raspberry Pi models (B+, 2 B, 3 B, 3 B+, 4 B) - Filesystem automatically expands on first boot Note: CODESYS V3.5 SP17 has some changes compared to previous versions, notably: - The installation of new packages via the Package Manager now mostly starts when the Package Manager and CODESYS are closed. - The Raspberry Pi runtime has a new version number; it is now 4.x.x.x and no longer 3.5.x.x. - The Raspberry Pi package now has a dependency to another (new) package named “CODESYS Edge Gateway for Linux” which has to be installed first. - The CODESYS Package Manager can now install multiple packages at once. To install all required packages, you only need to select the „PiXtend V2 Professional for CODESYS“ package and the other packages will be installed automatically, given that all packages are in the same folder. - User Management: New in this version is the activation of the User Management system by default. Up on the first connection to the PLC, CODESYS asks the user to set a “username” and a “password”. It’s probably a good idea to write this information down, as it is needed for each CODESYS session to be able to login into the PLC. If you don’t want to use this feature, please see the information in the CODESYS forum. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SpiderControl I4.0 Integration Suite from iniNet Solutions GmbH The „SpiderControl I4.0 Integration Suite“ is a comprehensive low-code tool for developing solutions for integrating OT into IT. The implementation of I4.0 projects requires a simple connection of applications from the IT level (ERP, accounting, sales, documentation, …) with the automation level. The „I4.0 Integration Suite“ package is pre-installed on PiXtend®, which offers an extensive library of functions for solving aforementioned tasks so that users from the automation environment can implement and maintain these tasks themselves using a very simple browser-based function plan programming language. The presented setup can be downloaded as a complete SD card image. Incidentally, all relevant components are already pre-installed on this in the image. There is no faster or easier way to get an I4.0 project up and running! More information in the video: https://www.youtube.com/watch?v=fN2_90Z6VEw Install an image on PiXtend and start your browser – You are ready to go! Download: PiXtend Image Basic with I4.0 Integration Suite -> PiXtend_Image_I4.0IS_Basic_V2_0_1_2.zip PiXtend Image CODESYS with I4.0 Integration Suite and Raspberry Pi Runtime 4.1.0.0 for CODESYS V3.5 SP17 -> PiXtend_Image_I4.0IS_CODESYS_V2_0_1_2.zip The general settings of both SD card images can be read above in the download section of the SD card images for the Basic and CODESYS image without the I4.0 Integration Suite. For more information and download options visit the iniNet Solutions GmbH website: https://spidercontrol.net/download/downloadbereich-neu/#pixtend